Detailed Description:
Wiremold Multi- service recessed pre-wired poke-thru assembly contains 5BLH 1/2-Gang blank housing, three 1PTHA 1-Gang pass through housing assembly, 575CHA 1/2-Gang 3/4-Inch conduit housing assembly, 8DIV 8-Inch divider for bottom feed compartments. Flush cover is made of die-cast aluminum with black finish. Cover has two spring-loaded slide egress doors that locks in position when slide open and closes automatically around cables. This assembly has an improved hinge design to provide convenient opening/closing motion. It measures 16-3/4 Inch x 8 Inch Dia. Assembly is UL listed and RoHS compliant.
Application | Commercial, Office |
Brand | Wiremold |
Catalog Description | For tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. Includes one (1) 8TS Tile Shim. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No device plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider, One (1) 8TS Tile Shim. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Black |
Construction | Assembled |
Finish 2 | Black |
GTIN |
00786564060505 |
Height | 19.5000 |
Height Unit | IN |
Item Status | O |
Length | 11.5000 |
Length UOM | IN |
Mfr. # | 8ATPBK |
Mounting | Through Floor |
Number Of Outlets | 4 |
Size | "16 3/4"" L" |
Special Features | "Largest capacity poke-thru devices on the market. The 8AT Series is designed for an 8"" [203mm] core hole and provides up to four (4) gangs of power, communication, or A/V capability." |
Standard | cULus Listed Metallic Outlet Boxes: File E2961 Guide QCIT. cULus Listed Nonmetallic Outlet Boxes & Fittings Classified for Fire Resistance: File R8209 Guide CEYY. Meets Article 300.21, 300.22(C) & 314 of NEC. |
Sub-Brand | Wiremold |
Type | Evolution 8AT Series Poke-Thru |
UNSPSC | 39121328 |
Width | 11.5000 |
Width UOM | IN |