Dimension: 9 Inch Length x 8-3/4 Inch Height
22 Watt constant current driver
Semi-specular anodized aluminum reflector
RAB LFLOOD® LED Sensor flood light in bronze color features a customizable EZ layout with an ultra efficient/optical LED design. It has non-toxic metallic construction with eco-friendly polyester powder coating for durability and long lasting color. It has 180 deg detection pattern and produces an enhanced output at 100000 hours of operation. It is equivalent to a 70-Watts metal halide area light. It runs on a class 2 constant current/high output LED driver rated at 0.4 Amps to provide 76 LPW efficacy, 81% efficiency and 1681 lumens. It has a voltage rating of 120 Volts at 60 Hz. It has a power rating of 18 Watts and requires an input of 22 Watts. It features a photoelectric control that deactivates lights during daylight.
Light delivers 7 horizontal and 6 vertical NEMA beam spread distribution. It has sturdy die-cast aluminum housing/lens frame and includes high temperature silicone gaskets that are weather-resistant. It operates at an ambient temperature of 40 deg C and requires a minimum temperature of -40 deg F/-40 deg C. It is includes a surge protection driver that withstands up to 3000 Volts for added safety. It measures 9 Inch x 8-3/4 Inch. Light is equipped with a rugged cast aluminum thermal management system featuring airflow technology for optimal heat sinking/minimal LED junction temperature. It works day or night and has an adjustable time of five seconds - 15 minutes.
Floodlight features a double flip wall switch logic to avoid brief power outages activation. It has negligible power consumption and resets after 8 hours. Lamp is equipped with a LED that glows red day and night for "on guard" deterrence. It has no manual switch and features ambient light sensing and sensitivity adjustment. Lamp has fully shielded circuits for optimum radio frequency immunity. It provides sensor switching capacity of 5 Amps/450 Watts LED at 120 Volts for 0.8 pico-Farad driver, 5 Amps/300 Watts LED at 120 Volts for 0.5 pico-Farad driver.
It is fully adjustable for 24 hours operation or custom applications. Light is suitable for use with most of the most electronic ballasts and not for instant start ballasts. It provides a cool color temperature of 5000K at 69 CRI accuracy. It has a semi-secular, anodized aluminum reflector for superior light distribution pattern. It has a total harmonic distortion of 8.5% at 120 Volts and 7.2% at 277 Volts. It features a 7-step MacAdam ellipse binning design for fixture-to-fixture color consistency and uniformity. It has a mounting arm for ease of installation and can be mounted within 1.2 m of ground.
Floodlight has a quick test time of five seconds for quicker installation. It is equipped with an auto mode that starts after four minutes of testing, without requiring adjustment. Floodlight comes with a lamp. Light is suitable for wet locations and is IESNA LM-79/IESNA LM-80 tested. It does not require extra wiring. It is mercury/UV free. Floodlight conforms to Green technology. The correlated color temperature of the light meets American national standards. Light is UL listed and meets California title 24 building/electrical codes, Buy American Act, Recovery Act, Trade Agreements Act compliances.
|Catalog Description||LSTEALTH FFLED18 18W COOL LED WITH MINI SENSOR SMS500 BNZ|