Detailed Description: FLCDMC6EIY PANDUIT OPTICAM?« 62.5??M OM1 LC DUPLEX FIBER OP
Application | Maintenance or emergency restoration of fiber networks and retrofit/initial install in both behind-the-wall (BTW) and in the permanent side of panelized interconnect and cross-connect. |
Brand | Panduit |
Catalog Description | LC Opticam 62.5/125 Micron Multimode Duplex Fiber Optic Connector for 900 Micron tight-buffered fiber installation, Electric Ivory, Spring-loaded Senior rear pivot latch LC connector, Quick installation; provide field termination in less than half the time of field polish connectors, Patented re-termination capability provides yield rates approaching 100 percent, Factory pre-polished fiber endface eliminates time-consuming field polishing to reduce installation costs, labor, scrap and the number of tools required, Cam activated fiber and buffer clamp mechanisms provide superior fiber and buffer retention - less sensitivity to fiber tensile loading, No separate clamps, tools, or steps are required to secure both the fiber and the buffer, OptiCam Termination Tool simplifies tooling and termination, and virtually eliminates operator error by providing visual indication of proper termination after the cam step has been completed, Cable retention boot assemblies consistently provide higher than industry standard cable retention, Non-optical disconnect maintains data transmission under tensile loads for jacketed cable, Fiber cable size: accept 900um tight-buffered fiber with included boot(s); accept 1.6mm - 2.0mm and 3.0mm jacketed cable with available OptiCam Cable Retention Boot Assemblies (ten per package), For 250 micron coated fiber termination, use 250 micron fiber build-up tube kit or fan-out kits, Ferrule type, 1.25mm zirconia ceramic (highest durability for repeated matings) Use OptiCam Termination Kit (FCAMKIT). |
Connection | LC |
Fiber Type | OM1 |
Finish 2 | Electric Ivory |
GTIN |
00074983127061 |
Insertion Loss | 0.3 |
Item Status | A |
Mfr. # | FLCDMC6EIY |
Special Features | Factory pre-polished fiber endface eliminates time-consuming field polishing |
Standard | Exceeds the TIA/EIA-568-B.3 requirements |
Sub-Brand | OptiCam |
Temperature Rating | 140 |
Type | Fiber Optic Connectors, LC OptiCam |
UNSPSC | 43223301 |