Size: 7.350 Inch Length x 3.410 Inch Width x 1.250 Inch Height
Very large dual display
HART mode setting with loop power and a built-in 250 Ohm resistor
1200 Ohm drive capability on Milli-Amp source
0% and 100 % buttons to toggle between 4 and 20 Milli-Amp sourcing for a quick span check
Externally accessible fuses for easy replacement
Infrared port to process data in flukeView forms (V2.1) software
Continuity Beeps for resistance: < 100 O
Detailed Description:
Fluke Process meter is designed to troubleshoot and measure electrical quantities in high-tech commercial/industrial circuit. It measures AC/DC voltage between 0 - 1000 Volts. It is design to check AC/DC current rating from 0 -1 Amp. Multimeter has min, max and average options for accurate measurement. It has backlit LCD display with true brightness setting for operating device in low light environment. It measure 7.350 Inch x 3.410 Inch x 1.250 Inch. Multimeter LCD displays 4000 count for maximum value readout. True RMS sensing multimeter ensures accurate, error free values. Multimeter comes with fast acting fuse that withstands voltage rating of 1000 Volt and current rating from 450 milli-Amps for overload protection.
Process meter has infrared port to interface data on FlukeView software. It is used to measure 0 - 40 mega-Ohms circuit resistance and 0 - 19.99 kHz frequency. Diode test mode in multimeter tests for general purpose germanium, silicon and power diodes. Multimeter is powered by four AA alkaline batteries with 140 hours typical battery life. It operates within temperature range of -20 to 55 deg C and stored within temperature of -40 to 60 deg C. It has an audible beeper to signal continuity of cable or circuit. It is encased in a yellow colored holster and includes alligator clips, test lead as well as battery. Multimeter has CAT IV 600 V, CAT III 1000 V rated design for safer operation.
Amperage Rating | 1 |
Brand | Fluke |
Catalog Description | The Fluke 787 was the first tool to combine a DMM and aáloop calibratoráto give process technicians double the power in one tool. Now itÆs even better, the range is extended with the new Fluke 789 û the ultimate loop calibration multimeter. |
Enclosure | Hard plastic |
Frequency Rating | 19.999k |
GTIN |
00095969112192 |
Height | 2.5200 |
Height Unit | IN |
Item Status | A |
Length | 11.7700 |
Length UOM | IN |
Mfr. # | FLUKE-789 |
UNSPSC | 41113630 |
Voltage Rating | 1,414k//1,000 |
Width | 4.4100 |
Width UOM | IN |