Dimension: 18 Inch Length x 1 Inch Width
Ecosystem ballasts communicate via an Ecosystem digital bus and connect directly to sensors and controls
Dims to 10% (5% for T4 ballasts)
Also compatible with Lutron 3-wire fluorescent controls
Programmed rapid start design ensures full rated lamp life
Lamps turn on to any dimmed level without flashing to full brightness
Low harmonic distortion throughout the entire dimming range
Operating frequency ensures ballast does not interfere with IR devices
Lutron EcoSystem® Dimming ballast has a voltage rating of 120/240/277 Volts. Ballast is compatible with T5 lamps and can operate two lamps of power rating 36/39 Watts. A-rated ballast operates silently and has a ballast factor of 0.95. Energy efficient ballast incorporates inrush current limiting circuitry to prevent circuit breaker tripping, switch arcing and relay failure. It features programmed starting method that ensures long lamp life.
Dimming ballast provides uniform lighting and is ideal for all industrial applications. Ballast features flicker-free dimming from 100% to 10% for T5 lamps. Ballast offers wide range of dimming level without going to full brightness. It has very low harmonic distortion throughout the entire dimming range and maintains consistent light output for different lamp lengths. The case has a temperature rating 75 deg C.
Ballast incorporates end of life protection circuitry that ensures safe operation. It measures 18 Inch x 1 Inch. Ballast is ideal for all general lighting fluorescent applications. Ballast is grounded by a mounting screw to the fixture. Ballast has high power factor greater than 0.95. Ballast is UL listed and CSA certified.
|Amperage Rating||[email protected]/[email protected]/[email protected]|
|Catalog Description||EcoSystem 10 percent 3-Wire and EcoSystem Digital Link Controlled T5 Twin Tube 2 lamps, ballast factor of 1.00, J-can 36/39W/120/277V|
|Lamp Type||T5 Twin-tube fluorescent|
|Minimum Starting Temperature||50|
|Number Of Lamps||2|
|Power Factor||Greater than 0.95|
|Special Features||Maximize the benefits of a lighting management system. Offers continuous, flicker-free 100 % to 10 % dimming; ideal for use where saving energy, increasing flexibility, and maximizing productivity are the goals of the lighting design. Integral sensor connection provides power for and responds to one occupancy sensor, one photo sensor, and one personal control input (infrared receiver or wallstation). Communicates status and sensor inputs over the EcoSystem digital link. Programmed rapid start design ensures full rated lamp life while dimming and cycling. Lamps turn on to any dimmed level without flashing to full brightness. Low harmonic distortion throughout the entire dimming range. Frequency of operation ensures that ballast does not interfere with infrared devices. End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life. Ultra-quiet operation. Non-volatile memory restores all ballast settings after power failure. Ballast maintain consistent light output for linear lamp lengths. Protected from miswires of any input to power to control lead, or from lamp leads to each other and/or ground. 100 % performance tested at factory. Custom ballast factors available. Design tool and specifications can be found at www.lutron.com/ballasttool|
|Standard||UL, CSA, S Mark certified, Class P thermal protected, ANSI, FCC|
|Start Type||Programmed rapid|
|Thermal Protection||Class P|
|Total Harmonic Distortion||Less than 10%|