Dimension: 4.900 Inch Length x 1 Inch Width
4560 system lumens
Ecosystem ballasts communicate via an Ecosystem digital bus and connect directly to sensors and controls
Dims to 10% (5% for T4 ballasts)
Also compatible with Lutron 3-wire fluorescent controls
Operating frequency ensures ballast does not interfere with IR devices
Non-volatile memory restores all ballast settings after power failure
100% performance tested at factory
Lutron EcoSystem® 3D Compact studded dimming ballast has a voltage rating of 120/220/240/277 Volts. Ballast is compatible with T4 4-Pin quad-tube or triple tube and can operate two lamps of power rating 26 Watts. A-rated ballast operates silently and has a ballast factor of 0.95. Energy efficient ballast incorporates inrush current limiting circuitry to prevent circuit breaker tripping, switch arcing and relay failure. It features programmed starting method that ensures long lamp life.
Dimming ballast provides uniform lighting and is ideal for all industrial applications. Ballast features flicker-free dimming from 100% to 5% for T4 lamps. Ballast offers wide range of dimming level without going to full brightness. It has very low harmonic distortion throughout the entire dimming range and maintains consistent light output for different lamp lengths. The case has a temperature rating 75 deg C.
Ballast incorporates end of life protection circuitry that ensures safe operation. Ballast is ideal for all general lighting fluorescent applications. Ballast is grounded by a mounting screw to the fixture. Ballast has high power factor greater than 0.95. Ballast is UL listed and CSA certified.
|Amperage Rating||[email protected] V/[email protected]/[email protected]/[email protected], 26 W lamps. [email protected] V/[email protected]/[email protected]/[email protected], 32 W lamps.|
|Catalog Description||EcoSystem 5 percent 3-Wire and EcoSystem Digital Link Controlled T4 Compact, 2 lamps, ballast factor of 0.95, K-can, studded, 26/32W|
|Lamp Type||T4 4-Pin Quad tube or Triple tube Fluorescent|
|Minimum Starting Temperature||50|
|Number Of Lamps||2|
|Power Factor||Greater than 0.95|
|Special Features||Provides high-performance dimming for any compact fluorescent application. Offers continuous flicker-free dimming from 100% to 5 %, providing both energy savings and lighting flexibility. Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS with EcoSystem connection, PowPak dimming module with EcoSystem connection, and Quantum systems, allowing for integration into an existing/planned EcoSystem lighting control system. Supports standard 3-wire line-voltage phase control technology. Programmed rapid start design ensures full-rated lamp life while dimming and cycling. Lamps turn on to any dimmed level without flashing to full brightness. Low harmonic distortion throughout the entire dimming range. Frequency of operation ensures that ballast does not interfere with infrared devices. Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure. Ultr-quiet operation. Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground. End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life. Nonvolatile memory restores all ballast settings after power failure. 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls. 100% performance tested at factory. Custom ballast factors available. Design tool and specifications can be found at www.lutron.com/ballasttool|
|Standard||UL, CSA, Class P thermal protected, ANSI, FCC|
|Thermal Protection||Class P|
|Total Harmonic Distortion||Less than 10%|