Juno Lighting UPX322-BZ 3-Light Xenon Pro-Series Under-Cabinet Light Fixture; 60 Watt, 12 Volt, Brushed Bronze, Lamp Included

Detailed Description: Juno Lighting 3-Light xenon pro-series under-cabinet light fixture in elegant brushed bronze finish has an integral electronic 120 - 12 Volts step down transformer that is easily accessible for maintenance without removing fixture. Light fixture operates with voltage rating of 12 Volts and power rating of 60 Watts It has xenon bi-pin lamps to deliver optimal light output and lamp life with best color rendering. It has a clear prismatic tempered glass lens for optimum light transmission. It delivers 10000 hours of lamp life, based on actual operating voltage in fixture. Light fixture requires an input power of 60 Watts. It has a current rating of 0.50 Amps and delivers a power factor of 0.99.

Light fixture has sturdy extruded aluminum housing for durability and comes with a specular aluminum reflector behind each lamp for superior light distribution pattern. It features a unique housing/reflector system with minimal mounting surface temperature. It is engineered with a reverse-angled diffuser for reduced perceived brightness. Light fixture has a hinged captive lens to provide re-lamping without using any tools. It measures 22 Inch x 4.500 Inch x 1 Inch. It is provided with a spring-loaded retention bar to reduce lens from accidently being bumped loose. It is equipped with an integral high/low/OFF rocker switch for convenience.

Light fixture measures 22 inches in length. It is provided with rear wiring for easy access to the compartment covers that are provided with push-in connector for non-metallic cable/knockout and feed-thru wiring. Light fixture has a die-cast fitting for 3/8-Inch flexible metal conduit in mounting hardware. Cabinet at the bottom contact of the light withstands a temperature of less than 60 deg C.

Light fixture can be easily flush mounted to the backsplash or up, against the front lip of the cabinet by using captive external mounting screws. It can be permanently installed as per user preferences to suit project conditions. It is provided with an optional direct wire module for added installation convenience. Light fixtures of up to 10 can be electrically joined together, by using either straight joiner connector or with the optional JC3 jumper cords. Light fixture is UL listed.