Size: 2.030 Inch Width x 2.460 Inch Depth x 3.750 Inch Height
50 deg C maximum temperature rise at full rated current
Overload UL20 test: 100 cycles of overload at 4.8 times rated current, overload UL508 test: 50 cycles of overload at 6 times rated current
Nickel plated brass yoke, silver-cadmium 0.031 Inch thick contacts, nickel plated brass 10-32 terminal screws
T1, T2, L1 and L2 terminal identification marked on back of device
Ratings are permenantly marked on device
Nickel plated brass strap material
Internal chamber barriers prevent flash-over between phases
Leviton 3-Pole 3-Phase Industrial grade AC motor starting switch is engineered to deliver safe and reliable control of a wide range of motor loads. It has a voltage rating of 600 VAC and current rating of 40 Amps. It has a power rating of 3 hp at 120 Volts, 7.5 hp at 240 Volts, 15 hp at 480 Volts and 20 hp at 600 Volts. It is designed to withstand a dielectric voltage of 2200 Volts for 1 min. It has a short circuit rating of 10000 RMS symmetrical Amps at maximum voltage 600 VAC when protected by a 30 Amps time delay fuse.
Switch's base, cover and standard toggle is made of PBT polyester material to offer resistance against impact, chemicals, temperature, tracking and arcing. It includes nickel-plated brass screws and bushings for quick installation. It is featured with a cam-driven mechanism to increase fast-make/slow-break. It is provided with silver-alloy contacts for superior conductivity and service life. It measures 2.030 Inch x 2.460 Inch x 3.750 Inch. It has external clamps to accommodate 10 - 8 AWG back and side wiring. Switch features T1, T2, T3, L1, L2 and L3 marked terminals on back for easy identification.
Switch is provided with an internal insulating barrier between the terminals to offer isolation between the phases. It has a non-corrosive, durable nickel-plated brass mounting yoke with permanently marked with catalog number, amperage, voltage and horsepower ratings for easy identification. Switch features an oversized toggle for easy turn-ON/OFF. Switch with triple-drive nickel-plated terminal screws enable tightening to accurate torque ranges. It has 6000 cycles of endurance for inductive motor type load. It has 50 cycles of overload protection at 6 times full rated current.
Switch operates at a temperature range of -40 to 60 deg C and has a temperature rise of 50 deg C at full rated current. It has a torque of 20 Inch lb. It has UL94 V-0 flammability rating to withstand harsh environment conditions. Switch meets WD1 & WD6 NEMA, C-73 ANSI, File E63969 UL 508, File #E63969 cUL per CSA C22.2 No. 111 and 057 NOM standards.
|Catalog Description||40 Amp, 600 Volt, Three-Pole, Three Phase AC Motor Starter, Suitable as Motor Disconnect, Industrial Grade, Non-Grounding, Black|
|Connection||Back Wired;Side Wired|
|Environmental Conditions||Flammability (Rated V-0 per UL94)|
|Number Of Poles||3|
|Operating Temperature||-40 to +60|
|Ships Ground. Eligible for expedited shipping||Yes|
|Size||3.75 H x 23 W x 2.46 D|
|Standard||NEMA (WD-1 & WD-6);ANSI (C-73);NOM Certified (057);UL508 (File E63969);cUL per CSA C22.2 No. 111 (File E63969)|
|Type||Standard Toggle;Three-Pole AC Motor Starter Switch|