Size: 4.250 Inch Length x 3.250 Inch Width x 7.500 Inch Height
Protection status leds diagnostics
Leviton Panel Protective device is made of powder coated steel and is single phase with 4-mode protection. It has 50kA max surge current rating and NEMA 3R enclosure. Panel Protector is featured with frequency rating of 50/60 Hz and operating temperature of -10 to +60. It has storage temperature of -20 to +85 deg C and humidity of 5 to 95% non-condensing. Devices have surge current per phase of 50 Killo-Amps and surge energy per phase of 950 J. It measures 4.250 Inch x 3.250 Inch x 7.500 Inch.
Leviton Panel protector is used to protect sensitive electronic equipment, in industrial, commercial and residential locations, from the stress and degradation inflicted by voltage transients. Devices divert damaging voltage transients, or surges, away from electronic equipment and transients are diverted away from sensitive micro circuitry, providing protection against catastrophic failure, costly downtime and data disruptions. It is UL 1449 certified..
|Catalog Description||120/240 Volt Panel Protector 4-Mode Protection, Light Commercial/Residential Grade, in NEMA 3R Enclosure|
|Connection||Parallel Connection;Hardwired via 12AWG wire|
|Environmental Conditions||Storage temperature (-20 to +85 DEGC);Humidity (5 to 95% Non-Condensing);Flammability (Rated UL 94 V-2)|
|Material||Powder Coated Steel (Outer);Polycarbonate (Module)|
|Operating Temperature||-10 to +60|
|Size||8H x 6.50 W x 4.45 D|
|Standard||ANSI\IEEE (Category C-62.11, C-62.41, C-62.45);NEC (285)|
|Type||Type 2 SPD|