Detailed Description:
Appleton Fluorescent lighting fixture in gray has copper-free aluminum construction with epoxy finish for corrosion resistance and durability. It supports up to three explosion-proof, impact-resistant and heat-resistant glass tubes. It protects lamps and features 32-Watt, 265 Milli-Amps T8 rapid start fluorescent lamp. The three hubs with two close-up plugs on each end of the fixture provide for mounting straight down or at a 45-degree angle to either side.
It operates at a voltage rating of 120 - 277 Volts, power rating of 96 Watts, current rating of 0.78 - 0.33 Amp and temperature rating of -18 to 60 degree Celsius. It is suitable for paint spray booths, in pharmaceutical firms, paint-manufacturing plants, printing plants or any location where ignitable dust, fumes, gases, paint residue, paint powder or corrosive atmospheres. The fluorescent lighting fixture meets UL, CSA, Class I, Class II, Class III, Division 1 and 2 and Groups C, D, E, F, G standards.
Amperage Rating | 330m-780m |
Application | For Use In Wet Locations, Classified Areas Such As Inside Paint Spray Booths, In Pharmaceutical Firms, Paint-Manufacturing Plants, Printing Plants Or Any Location Where Ignitable Dust, Fumes, Gases, Paint Residue, Paint Powder Or Corrosive Atmospheres May Be Present |
Brand | Appleton |
Catalog Description | Appleton EFU Fluorescent Factory Sealed Luminaire, Lamp Type: (3) 32 WTT 265 MILAMP T8 Bi-Pin Rapid Start Fluorescent (Not Included), Lamp Wattage: 32 WTT, Voltage Rating: 120 - 277 V, Number Of Lamps: 3, Material: Copperfree (4/10 Of 1 PCT Maximum) Hood, Fixture Wattage: 96 WTT, Amperage Rating: 0.78 - 0.33 AMP Operating, Length: 52-7/16 IN, Width: 19-1/4 IN, Height: 8-3/4 IN, Housing Finish: Gray Epoxy, Housing Material: Copperfree (4/10 Of 1 PCT Maximum) Aluminum, Temperature Range: -18 DEG C (Minimum Starting), 60 DEG C (Supply Wire), Reflector/Refractor: Copperfree (4/10 Of 1 PCT Maximum) Aluminum White Baked Enamel Inside And Gray Epoxy Outside Reflector, Hub Size: 3/4 IN, Number Of Hubs: 6, Frequency: 50/60 HZ, Standard: Class I, Division 1 And 2, Groups C, D, Class II, Division 1 And 2, Groups E, F, G, Class III, UL Listed: E10794, 1598, 844, 60079-0, 60079-15, CSA Certified: 65182, C22.2 No. 250, C22.2 No. 137, For Use In Wet Locations, Classified Areas Such As InsidePaint Spray Booths, In Pharmaceutical Firms, Paint-Manufacturing Plants, Printing Plants Or Any Location Where Ignitable Dust, Fumes, Gases, Paint Residue, Paint Powder Or Corrosive Atmospheres May Be Present |
GTIN |
00781381078306 |
Height | 8.75 |
Height Unit | IN |
Item Status | O |
Lamp Type | (3) 32 WTT 265 MILAMP T8 Bi-Pin Rapid Start Fluorescent (Not Included) |
Length | 52-7/16 |
Length UOM | IN |
Material | Copperfree (4/10 Of 1 PCT Maximum) Hood |
Mfr. # | ARS332BU |
Number Of Lamps | 3 |
Special Features | Factory sealed - external seals not required; Easy to install; Three hubs with two close-up plugs on each end of fixture provide for mounting straight down or at a 45 DEG angle to either side; Explosionproof, impact-resistant and heat-resistant glass tubes protect lamps; Reflectors can easily be removed for replacement or cleaning using only a screwdriver; Supplied with Class P ballasts, equipped with an automatic thermally activated protective device, offering protection against excessive voltage, internal ballast short circuiting, inadequate lamp maintenance and improper fixture application; Non-sparking exterior surfaces for safer operation; 4 FT fluorescent lamp |
Standard | Class I, Division 1 And 2, Groups C, D; Class II, Division 1 And 2, Groups E, F, G; Class III; UL Listed: E10794, 1598, 844, 60079-0, 60079-15; CSA Certified: 65182, C22.2 No. 250, C22.2 No. 137 |
Type | EFU Fluorescent Factory Sealed Luminaire |
UNSPSC | 39111501 |
Voltage Rating | 120 to 277 |
Width | 19.25 |
Width UOM | IN |