Images are representative of products listed and may not be actual product
Continuous, flicker-free dimming from 100% to 5%
Compatible with ecosystem digital bus control, graphic eye® qs, and quantum®
Supports standard 3-wire line-voltage phase control technology
Ultra-quiet operation
Detailed Description: Lutron EcoSystem® CFL Dimming ballast features a programmed rapid start design to ensure full-rated lamp life by dimming and cycling. Ballast supports standard three-wire line-voltage phase control technology. It offers continuous, flicker-free dimming from 100 to 5%. Ballast is rated at 120/240/277 Volts and 0.34/0.18/0.17/0.15 Amps. It allows T4 triple-tube four-pin lamp and requires power rating of 18 Watts. It provides ultra-quiet operation. Ballast meets Class P, UL and CSA certifications.
Amperage Rating | 0.34@120 V/0.18@220V/0.17@240V/0.15@277V |
Application | Lighting Control |
Ballast Factor | 0.95 |
Brand | Lutron |
Catalog Description | EcoSystem 5 percent 3-Wire and EcoSystem Digital Link Controlled T4 Compact, 2 lamps, ballast factor of 0.95, K-can, 18W |
Dimmable | Dimmable |
Finish 2 | White |
Frequency Rating | 50/60 |
GTIN |
00027557638685 |
Height | 1.29 |
Height Unit | IN |
Item Status | A |
Lamp Type | T4 4-Pin Quad tube or Triple tube Fluorescent |
Length | 4.9 |
Length UOM | IN |
Mfr. # | EC3DT418KU2 |
Minimum Starting Temperature | 50 |
Mounting | Fixture |
Number Of Lamps | 2 |
Power Factor | Greater than 0.95 |
Special Features | Provides high-performance dimming for any compact fluorescent application. Offers continuous flicker-free dimming from 100% to 5 %, providing both energy savings and lighting flexibility. Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS with EcoSystem connection, PowPak dimming module with EcoSystem connection, and Quantum systems, allowing for integration into an existing/planned EcoSystem lighting control system. Supports standard 3-wire line-voltage phase control technology. Programmed rapid start design ensures full-rated lamp life while dimming and cycling. Lamps turn on to any dimmed level without flashing to full brightness. Low harmonic distortion throughout the entire dimming range. Frequency of operation ensures that ballast does not interfere with infrared devices. Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure. Ultr-quiet operation. Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground. End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life. Nonvolatile memory restores all ballast settings after power failure. 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls. 100% performance tested at factory. Custom ballast factors available. Design tool and specifications can be found at www.lutron.com/ballasttool |
Standard | UL, CSA, Class P thermal protected, ANSI, FCC |
Start Type | Rapid |
Sub-Brand | EcoSystem |
Thermal Protection | Class P |
Total Harmonic Distortion | Less than 10% |
Type | Ballast |
UNSPSC | 39101901 |
Voltage Rating | 120/220/240/277 |
Wattage | 18 |
Width | 3 |
Width UOM | IN |