Eaton / Cutler Hammer SPD100240H1P SPD Series Type 1 Metering Surge Protection Device; 240 Volt High-Leg Delta (4W+G) on B' Phase', 20 Kilo-Amp, 3-Phase

Detailed Description: Eaton / Cutler Hammer SPD Series 3-Phase Surge protection device is rated at 100 kilo-Amps/240 Volts and protects equipments from damage caused by surge events. It has interrupt current rating of 200 kilo-Amps. It features 304 stainless steel construction for strength. Device has four-wire configuration with a grounding connection and is made of durable stainless steel. It features a dual-colored LED per phase to indicate safety status and to indicate protection status of the N-G mode on units with a neutral wire. Device can be mounted on the side externally, operates at 150 Volts for L-N/L-G/N-G and 300 Volts for L-L. It includes an audible alarm with silence button, Form C relay contact and an EMI/RFI filtering that provides up to 50 dB of noise attenuation from 10 kHz - 100 MHz. It is enclosed in a NEMA 4X rated enclosure. It measures 7.470 Inch x 4.410 Inch x 12.050 Inch. It operates at a frequency of 50/60 Hz and has power rating of 0.5 Watts. It has operating temperature of -40 to 50 deg C. It is suitable for all electrical applications, including service entrances and distribution switchboards. It uses thermally protected metal oxide varistor technology and works up to 16000 ft. Surge protection device is UL listed and CSA certified.