Eaton / Cutler Hammer DT3010 General Purpose Relay; 120 - 240 Volt AC, 48 - 250 Volt DC Volt AC/DC

Detailed Description: Eaton / Cutler Hammer General purpose relay features complete current protection devices and metering equipment in single compact case for reducing panel/wiring space. It comes with 120 VAC voltage rated dual-source power supply that provides reliable protection if applied with AC control power to eliminate need of batteries/UPS. Zone selective interlocking option improves coordination and tripping times in relay. Relay has integral test function and microprocessor design to offer precision and reliable switching operation.

Relay is rated for secondary current input of 5 Amps and continuous thermal current of 500 Amps. It has voltage rating of 120 - 240 VAC/48 - 250 VDC. Maximum power consumption of the relay is 15 VA at voltage of 120 VAC. It is rated for current of 30 Amps at make and 5 Amps at break. Die-electric strength of the relay is 3000 VAC for 1 minute. It provides 3-Phase, ground overcurrent, feeder circuit, transformer and differential protection for all voltage levels.

Relay is compatible with Eaton / Cutler Hammer's PowerNet that has inbuilt INCOM protocol to interface with computer at data transfer rate of 1200/9600 baud. Terminal block has make/break rating of 10 Amps at 240 VAC and 0.25 Amp at 280 VDC. Terminal block with tightening torque of 18 Inch-lb accommodates 14 - 10 AWG conductors. It operates within temperature rating of -30 to 55 deg C and stored at temperature range of -40 to 70 deg C. It is used in environment that has relative humidity of 0 - 95%. Relay is UL listed and meets ANSI standards.