Size: 7.390 Inch Length x 4.180 Inch Width x 3.860 Inch Height
Eaton's C30CNM or approved equal are rated for lighting loads of 30 Amp large initial inrush currents of tungsten and ballast lamp loads as well as non-motor loads without contacts welding
Detailed Description: Eaton / Cutler Hammer 6-Pole Mechanically held lighting contactor withstands large initial inrush currents of tungsten and ballast lamp loads and non-motor loads without contacts welding. Contactor is ideal for office buildings, industrial plants, hospitals, stadiums, airports. It measures 7.390 Inch x 4.180 Inch x 3.860 Inch. Contactor can be operated during the control power circuit power failures. It has coil rated at 30 Amps, 110 Volts at 50 Hz, 115 - 120 Volts at 60 Hz. It has 6 NO configuration and contact rating of 600 Amps/24 VDC/24 Volt-Amps. The two-wire contactor operates at a temperature of -13 to 104 deg F. It can be three-point mounted in vertical position. Contactor is UL listed.
|Application||Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsElec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - OtherElec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMsInd Facilities & Factories - Facility: Lighting and Lighting Controls|
|Catalog Description||NEMA Mechanically Held Lighting Contactor, 6NO 0NC contacts, 30A, C30 series, 120V, Six-pole, Two-wire|
|Contact Configuration||6 NO, 0 NC|
|Standard||UL Listed,CSA Certified|
|Type||Mechanically held lighting contactor|