Size: 7.390 Inch Length x 4.180 Inch Width x 3.860 Inch Height
Eaton's C30CNM or approved equal are rated for lighting loads of 30 Amp
Detailed Description: Eaton / Cutler Hammer 4-Pole Mechanically held lighting contactor withstands large initial inrush currents of tungsten and ballast lamp loads and non-motor loads without contacts welding. Contactor is ideal for office buildings, industrial plants, hospitals, stadiums, airports. It measures 7.390 Inch x 4.180 Inch x 3.860 Inch. Contactor can be operated during the control power circuit power failures. It has coil rated at 30 Amps, 110 Volts at 50 Hz, 115 - 120 Volts at 60 Hz. It has 4 NO configuration and contact rating of 600 Amps/24 VDC/24 Volt-Amps. The three-wire contactor operates at a temperature of -13 to 104 deg F. It can be three-point mounted in vertical position. Contactor is UL listed.
Application | Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsElec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - OtherElec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMsInd Facilities & Factories - Facility: Lighting and Lighting Controls |
Brand | Eaton |
Catalog Description | Eaton C30CN mechanically held lighting contactor, 30 A, 1 NO, 4 NO 0 NC, 30 A, Four-pole, Three-wire, Mechanically and electrically held, C30 Series, Lighting contactors, 120 V |
Contact Configuration | 4 NO, 0 NC |
Contact Rating | 30 A |
GTIN |
00782116133864 |
Height | 6.2500 |
Height Unit | IN |
Item Status | A |
Length | 8.0000 |
Length UOM | IN |
Mfr. # | C30CNM40A03A0 |
Standard | CSA Certified,UL Listed |
Type | Mechanically held lighting contactor |
UNSPSC | 39121529 |
Width | 6.5000 |
Width UOM | IN |