Size: 1.900 Inch Length x 2.200 Inch Width x 1.900 Inch Height
60 deg throw
Eaton / Cutler Hammer Watertight/oiltight 30.5 mm selector switch is controlled by key lock and is constructed from heavy-duty die cast zinc for long lasting durability. It has three -position 60 deg throw cam-code that uses maintained switch configuration for operating. It utilizes any withdrawal position for removing key. It comes with NO and NC type contact for turning circuit ON/OFF. Switch comes with 6 Amps short circuit current rated fuse and grounding nibs for protecting circuits from short circuits/over current. It is rated for 600 VAC/VDC insulation voltage and 10 Amps thermal current.
Switch operates within temperature range of -17 to 66 deg C and can be stored within temperature range of -40 to 80 deg C. It has enclosed silver contacts with pointed reliability nibs to improve contact reliability even under dry circuit and fine dust conditions. Switch comes with drainage holes to prevent build up of liquid inside so that operation can be easier in freezing environment. It has frequency of operation rating of 1200 operation/hour and has rated life of 0.25 x 10^6 operation cycles. It has shock resistance rating of 5 g for duration of 20 milli-seconds.
Switch has saddle clamp type terminals with torque of 0.8 Nm for accommodating one 22 AWG to two 14 AWG conductors. It can be mounted horizontally. It measures 1.900 Inch x 2.200 Inch x 1.900 Inch. It comes with fingerproof shroud to meet IP2X degree of protection against direct electrical contact. Switch is UL listed/CSA certified and meets NEMA Type 3, 3R, 4, 4X, 12, 13 enclosure standards.
|Application||Elec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - Other|
|Catalog Description||30.5 mm Heavy-Duty Selector Switch Operator, 10250T, Cam 3, 60¦ throw, NEMA 3, 3R, 4, 4X, 12, 13, Non-illuminated, Three-position, Key, Center only|
|Ships Ground. Eligible for expedited shipping||Yes|
|Standard||UL Listed,CSA Certified,CE Marked|