Concrete tight when taped
EMT elbows have integral set-screw couplings that replace traditional emt coupling fittings used to connect the elbows to conduit so there is no longer a need for additional components or extra steps in installation saving the contractor time and money
Pre-set and staked tri-head screws are positioned on inside of elbow bend for easy access during installation
1/2 to 1 Inch elbows supplied with one set screw on each end, 1-1/4 to 4 Inch elbows supplied with two set screws on each end
2-1/2 to 4 Inch trade sizes supplied with protective end caps
Detailed Description: Crouse-Hinds EMT Elbow with integral coupling is made of steel for durability. Elbow has zinc-plated finish that offers corrosion resistance. It is used to make a 45 deg bend between two lengths of thin-wall or EMT conduit without the use of additional couplings. Elbow has a trade size of 1-1/4 inches. It has a curvature that is used to fit specific locations and/or make turns as well as changes directions. Elbow includes 2 set of screw on each end. EMT Elbow is UL listed and cUL listed.
Application | For Use To Make A 45 Or 90 Degree Bend Between Two Lengths Of Thin Wall Or EMT Conduit Without The Use Of Additional Couplings |
Brand | Cooper Crouse-Hinds |
Catalog Description | 1-1/4 45 DEG EMT ELBOW |
Country Of Origin | CN |
Finish | Zinc-Plated |
GTIN |
00662277020206 |
Item | 45 Degree Elbow with Integral Coupling |
Material | Steel |
Mfr. # | ELB12545 |
Size | 1-1/4 In |
Special Features | With Integral Coupling, Weight 100 Lb per 100 |
Standard | UL, CUL |
Standards | UL, cUL Listed |
Trade Size | 1-1/4 Inch |
Type | Elbow, 45 Deg |