Rugged positive action design
100 Micro-Amp Lowest measurable current
100 Micro-Amp to 800 Amp RMS continuous current range
Non-Destructive Current: 1500 Amp rms
Detailed Description: Fluke Current clamp probe is ideal for multimeters, recorders and safety testers for accurate non-intrusive AC current measurements. It comes in rugged positive action design that accommodates conductor size of 54 mm Diameter for good conductivity. Probe is suitable for digital multimeters that accept shrouded 4 mm banana plugs. It can measure continuous current rating of 100 milli-Amps to 800 Amps. Probe is designed to measure voltage rating of 600 Volts at a frequency rating of 30 Hz - 10 kilo-Hz. It gives precise measurements on maximum non-destructive current of 1500 Amps. Probe has a basic reading accuracy of +/- 1%. It has a output cable 1.6 m long. Probe has a conversion factor of 1000:1 for easy calculation.
Amperage Rating | 1.5k |
Brand | Fluke |
Catalog Description | AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output cable, Impedance: Load: Less Than Or Equal To 20 OHM, Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 70 DEG C, Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3 |
GTIN |
00095969401227 |
Height | 10.5000 |
Height Unit | IN |
Item Status | A |
Length | 1.6 MR Output cable |
Length UOM | IN |
Mfr. # | I800 |
UNSPSC | 41111905 |
Voltage Rating | 848.528//600 |
Width | 3.0000 |
Width UOM | IN |