Size: 8.900 Inch x 3.100 Inch x 1.600 Inch
Auto and manual ranging
Max capture function for inrush current measurements (30 mS response)
Rubber over-molded case with built-in probes storage
True-rms and display backlight
Low battery below approx 2.4 Volt
Detailed Description: Fluke AC/DC Clampon true RMS version digital clamp meter has voltage rating of 600 VDC/VAC and has DC current rating of 1000 Amps. Meter features auto power off, data hold, relative zero mode, audible continuity and large/ easy to read digital display. It accommodates conductor up to 2 inches of diameter and includes carrying case, test leads, batteries and user manual. It measures 8.900 Inch x 3.100 Inch x 1.600 Inch.
Dimensions | 277 MM Length X 78 MM Width X 40 MM Height |
Accuracy | Plus/Minus (1.5 PCT RDG + 4 LSD) For DC Current, Plus/Minus (1.5 PCT RDG + 5 LSD) For AC Current, Plus/Minus (1.5 PCT RDG + 4 LSD) For AC Voltage, Plus/Minus (0.5 PCT RDG + 3 LSD) For DC Voltage, Plus/Minus (0.6 PCT RDG + 4 LSD) For Resistance, Plus/Minus (3.5 PCT RDG + 6 LSD) For Capacitance |
Amperage Rating | 400/800/1k |
Brand | Amprobe |
Catalog Description | Clamp Meter, Voltage Rating: 400 MILV, 4 V, 40 V, 400 V, 600 V VAC/VDC, Amperage Rating: AC: 400 AMP, 800 AMP, DC: 400 AMP, 1000 AMP, Frequency Rating: 15HZ - 60HZ At 600 AMP - 800 AMP, Accuracy: Plus-Minus (1.5 PCT RDG + 4 LSD) For DC Current, Plus-Minus (1.5 PCT RDG + 5 LSD) For AC Current, Plus-Minus (1.5 PCT RDG + 4 LSD) For AC Voltage, Plus-Minus (0.5 PCT RDG + 3 LSD) For DC Voltage, Plus-Minus (0.6 PCT RDG + 4 LSD) For Resistance, Plus-Minus (3.5 PCT RDG + 6 LSD) For Capacitance, Display: 3 3-4 Digits 4000 LCD Counts, Operating Temperature: 0 - 40 DEG C, Dimensions: 277 MM Length X 78 MM Width X 40 MM Height, Battery: 1.5 V AAA, Power Consumption: Power Functions: 11 MAMP For AC AMP DC AMP, 2.9 MILAMP For Other Functions, Resistance: 400 OHM, 4 KOHM, 40 KOHM, 400 KOHM, 4 MOHM, 40 MOHM, Capacitance: 500 NFD, 5 MFD, 50 MFD, 500 MFD, 3000 MFD, UL Listed, CE Certified, Meets EN61010-1:2001: IEC61010-2-032(2002), EN61010-2-032(2002), UL61010B-2-032(2003) CAT III 600 V AC And DC Meets EN61326-1 |
Display | 3-3/4 Digits 4000 LCD Counts |
Frequency Rating | 15-60 |
GTIN |
00095969370011 |
Height | 1.6000 |
Height Unit | IN |
Item Status | P |
Length | 8.9000 |
Length UOM | IN |
Mfr. # | ACDC-100-TRMS |
Operating Temperature | 0 - 40 |
Special Features | True-rms, Measures AC current to 800 AMP and DC current to 1000A, AC/DC voltage to 600V, plus capacitance, and resistance; Continuity beeper quickly identifies shorts and opens; Relative zero mode displays the difference between the actual reading and a stored reference value and may be used with any function or range; Data hold freezes the reading on the display for further analysis; Diode test quickly finds voltage drops, MAX capture function measures inrush current (30 mS response); Combines user friendly features such as a large, easy to read backlit digital display, auto power-off to conserve battery life, and a third hand test probe holder Rubber over-molded case absorbs shock and provides built-in probe storage; Accommodates conductors up to 2.0 (50 MM) in diameter Includes deluxe carrying case, test leads, batteries (installed) and users manual; Jaw opening and Conductor diameter: 50 MM max; Included Accessories: Deluxe carrying case, test leads, batteries (installed), users manual; APO Timing: Idle for 30 minutes, APO Consumption: typical 190 MICR; Temperature Coefficient: nominal 0.15 x (specified accuracy) DEG at (0 -18 DEG C or 28 DEG C -40 DEG C), or otherwise specified; Relative Humidity: Maximum relative humidity 80 PCT for temperature up to 31 DEG C decreasing linearly to 50 PCT relative humidity at 40 DEG C; Update Rate: 3/S nominal, Polarity: Automatic; Altitude: Operating below 2000 MR; Overload Protections: Clamp-on jaws: DC 1000A or AC 800A rms continuous and COM terminals (all functions) : 600 VDC/VAC rms |
Standard | UL Listed, CE Certified, Meets EN61010-1:2001; IEC61010-2-032(2002), EN61010-2-032(2002), UL61010B-2-032(2003) CAT III 600 V AC And DC Meets EN61326-1 |
Type | Clamp Meter |
UNSPSC | 41113637 |
Voltage Rating | 400m/4/40/400/600//400m/4/40/400/600 |
Width | 3.1000 |
Width UOM | IN |