Explosion proof, dust-ignition proof and raintight
Accurately tapped, tapered threads for tight, rigid joints
Smooth, rounded integral bushing in each hub
UL listed
Detailed Description:
Appleton Unilet® Sealing fitting in gray color, has smooth, rounded integral bushing in each hub to safeguard conductor insulation. It has accurately tapped, tapered threads for tight, rigid joints and ground continuity. This sealing fitting has large opening for damming and filling. It is explosion-proof, dust-ignition-proof and rain-tight. It features Grayloy™ iron construction with triple coating.
The sealing fitting is suitable for use with threaded rigid metal conduit and IMC. It prevents passage of gases, vapors or flames from one portion of conduit system to another. It measures 1.75 Inch x 4.31 Inch. Sealing fitting has a trade size of 1 inch and bending radius of 1.38 inches. Sealing fitting is UL listed and CSA certified.
Application | For Use With Threaded Rigid Metal Conduit and IMC |
Brand | Appleton |
Catalog Description | UNILETS EYS Series 25 PCT Fill Vertical And Horizontal Sealing Fitting, Size: 1 IN, Material: Grayloy-Iron, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Color: Gray, Connection: Tapered FNPT, Turning Radius: 1.38 |
Connection | Tapered FNPT |
Finish | Zinc Electroplate/Chromate/Epoxy Powder Coat |
Finish 2 | Gray |
GTIN |
00781381621021 |
Height | 0.7200 |
Height Unit | IN |
Item Status | A |
Length | 7.5000 |
Length UOM | IN |
Material | Grayloy-Iron |
Mfr. # | EYS31 |
Size | 1 |
Special Features | For preventing passage of gases, vapors or flames from one portion of conduit system to another; Required in Class I, Division 1 and 2 locations within 18 IN of enclosures containing apparatus that may cause arcs, sparks or high temperatures; Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps; Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location; Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 IN or less conduit, seal must be located within 18 IN of either enclosure; Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations; Explosionproof, dust-ignitionproof, raintight; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; F |
Standard | UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181 |
Sub-Brand | UNILETS |
Type | EYS Series 25 PCT Fill Vertical And Horizontal Sealing Fitting |
UNSPSC | 39121311 |
Width | 4.6000 |
Width UOM | IN |