Required in class i, division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
UL listed for use with kwiko a sealing compound, also listed with certain competitors sealing cement
Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in class i, division 2 locations
Accurately tapped, tapered threads for tight, rigid joints and ground continuity; for sealing vertical conduit large opening for damming and filling
Detailed Description: Appleton EYS Series 25 PCT Fill sealing fitting has a trade size of 1/2 Inch and is designed for use with horizontal/vertical threaded metal conduits for close turning radius. Sealing fitting is made of Grayloy™ iron for enhanced durability. Raintight sealing fitting has zinc electroplate, chromate and epoxy powder coated finish to offer high corrosion resistance. It is ideal to stop passage of gases, vapors and flames from one portion of conduit system to another. It provides explosion-proof/dust-ignition proof seal and is suitable for hazardous locations. Fitting is UL listed for use with kwiko a sealing compound and CSA certified.
Application | For Use With Threaded Rigid Metal Conduit and IMC |
Brand | Appleton |
Catalog Description | UNILETS EYS Series 25 PCT Fill Vertical And Horizontal Sealing Fitting, Size: 1/2 IN, Material: Grayloy-Iron, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Color: Gray, Connection: Tapered FNPT, Turning Radius: 1. |
Connection | Tapered FNPT |
Finish | Zinc Electroplate/Chromate/Epoxy Powder Coat |
Finish 2 | Gray |
GTIN |
00781381620994 |
Height | 0.7000 |
Height Unit | IN |
Item Status | A |
Length | 6.8000 |
Length UOM | IN |
Material | Grayloy-Iron |
Mfr. # | EYS11 |
Size | 1/2 |
Special Features | For preventing passage of gases, vapors or flames from one portion of conduit system to another; Required in Class I, Division 1 and 2 locations within 18 IN of enclosures containing apparatus that may cause arcs, sparks or high temperatures; Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps; Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location; Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 IN or less conduit, seal must be located within 18 IN of either enclosure; Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations; Explosionproof, dust-ignitionproof, raintight; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; F |
Standard | UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181 |
Sub-Brand | UNILETS |
Type | EYS Series 25 PCT Fill Vertical And Horizontal Sealing Fitting |
UNSPSC | 39121311 |
Width | 5.1000 |
Width UOM | IN |