Furnished with internal ground screw
EFD/EFDB and EDS factory sealed control stations confine arcing of device within the enclosure, preventing ignition of ignitable atmospheres during control operation of motors and other equipment
Used in classified areas where flammable vapors, gases or highly combustible dusts are present
For installation in chemical and petrochemical plants, refineries and other process industries
Does not intermate with Contender® CPS 20 Amp pin and sleeve receptacles
Explosionproof and dust-ignition proof
Class I, Division 1 And 2, Groups C, D; Class I, Division 2, Groups B, C, D; Class Ii, Division 1 And 2, Groups E, F, G; Class Iii
Detailed Description: Appleton 2-Gang unilet pilotlight duplex is explosionproof and dust-ignition proof that made of malleable iron for long lasting durability and strength. Unilet in epoxy powder coated dichromate zinc electroplated finish has 3/4-Inch dead end hub. Unilet has enclosure that is rated at class I div 1 and 2 group B C D, class II div 1 and 2 group E F G, class III, NEMA 7C/7D/9E/9F/9G. It is designed to use with EFD/EDS series factory sealed control station and comes with internal ground screw for safe connection. Unilet is UL listed.
Application | For U-Line 20 AMP Receptacles, EDS Series Factory Sealed Manual Motor Starters, CPS 20 AMP Receptacles, EFD/EFDB and EDS Series Control Stations |
Brand | Appleton |
Catalog Description | 2-Gang Dead-End Mounting Body, Number Of Outlet: 1, Material: Malleable Iron, Size: 3/4 IN, Cable Entry: (1) 3/4 IN Hub, Mounting: Lugs, Width: 6.19 IN, Height: 6.38 IN, Enclosure: NEMA 7CD, 9EFG, Standard: UL 508, 698, 1203, UL File |
GTIN |
00781381272209 |
Height | 3.8000 |
Height Unit | IN |
Item Status | A |
Length | 7.0000 |
Length UOM | IN |
Material | Malleable Iron |
Mfr. # | EFD275-NL-Q |
Mounting | Lugs |
Special Features | Furnished with Internal Ground Screw; EFD/EFDB and EDS factory sealed control stations confine arcing of device within the enclosure, preventing ignition of ignitable atmospheres during control operation of motors and other equipment; Used in classified areas where flammable vapors, gases or highly combustible dusts are present; For installation in chemical and petrochemical plants, refineries and other process industries |
Standard | UL 508, 698, 1203, UL File Number E10449, E81751, Class I, Division 1 And 2, Groups C, D; Class II, Division 1 And 2, Groups E, F, G; Class III |
Type | 2-Gang Dead-End Mounting Body |
UNSPSC | 39131708 |
Width | 6.7000 |
Width UOM | IN |