Cast in hubs
Detailed Description: Appleton 3-Pole Manual contactor has malleable iron material construction with gray epoxy powder coating for durability. It provides explosion and dust-ignition proof. It has a current rating of 30 Amps and voltage rating of 600 VAC. It has a power rating of 3 Hp at 120 VAC, 7-1/2 Hp at 240 VAC, 15 Hp at 480 VAC and 15 Hp at 600 VAC. Contactor can be used to install a electrical wiring devices and comes with dead-end hub arrangement of size 3/4 Inch. It has easily readable operating handle made of nylon material with supply for padlocking in the ON/OFF position. Contactor is suitable for manual starting of small motors in hazardous locations by the presence of flammable vapors, gases and combustible dust. It meets NEMA 3/3R/7CD/9EFG rating. Manual contactor is UL listed and CSA certified.
|Application||For EDS Series Factory Sealed Manual Motor Starter And Contactor|
|Catalog Description||Manual Contactor, Number Of Poles: 3, Hub Size: 3/4 IN, Switch Rating: 30 AMP At 250 VAC/VDC, 20 AMP At 600 VAC, 1 HP At 115 VAC, 2 HP At 230 VAC, 3 HP At 460-575 VAC, Standard: UL 508, UL 698, UL 1203, CSA Number C22.2 14-M, C22.2 No. 25, C22.2 No. 30, C/US UL File Number E76550, E81751, Class I, Division 1, Groups C, D, Class II, Division 1 And 2, Groups E, F, G, Class III, For EDS Series Factory Sealed Manual Motor Starter And Contactor|
|Ships Ground. Eligible for expedited shipping||Yes|
|Special Features||Manual motor starters are available to meet any plant installation requirement; They may be used to install a variety of electrical wiring devices and comes complete with covers and dead-end or feed-through hub arrangements; Available with or without the starter switch; Complete units are ideal for manual starting of small VAC or VDC motors in locations made hazardous by the presence of flammable vapors, gases or combustible dust; Easily readable operator handle with provisions for padlocking in the ON or OFF position; Cast in hubs; Interchangeable heater units; Dead-end|
|Standard||UL 508, UL 698, UL 1203, CSA Number C22.2 14-M, C22.2 No. 25, C22.2 No. 30, C/US UL File Number E76550, E81751, Class I, Division 1, Groups C, D, Class II, Division 1 And 2, Groups E, F, G, Class III|