Size: 7-3/16 Inch Width x 3-1/16 Inch Depth x 5-3/32 Inch Height
Reduce installation problems
Eliminate external seals
Lower installation costs
Improve safety
Used with general purpose snap and pushbutton type switches
Standard neoprene covers for front operated pushbuttons, Prevents accumulation of dirt and entrance of water around operating shafts
Large machine screws for fastening covers to bodies
Detailed Description:
Appleton Contender® Series 3-Way 2-Gang Feed through tumbler switch has zinc electroplate, chromate, epoxy powder coated malleable iron constructed body/cover for durability. It is designed to protect enclosed devices from arching and corrosive/hazardous external environment. Switch has external mounting lugs and internal ground screw for offering quick installation. It has rocker arm type switch for controlling enclosed device. It has smooth, round integral bushing in each size 1 hub to protect conductor insulation.
Switch is rated for current of 20 Amps and voltage of 120 - 277 VAC. It is rated for power of 1 hp at 120 VAC and 2 hp at 240 VAC. It requires corrosion resistant, stainless steel hex head cap screws for fastening cover and body. It is used in highly corrosive and hazardous environment such as chemical plant, petrochemical/refineries industries and other process industries. Switch is designed to use in Class l, Class ll and Class lll classified areas that contain ignitable vapors, gases or highly combustible dusts. Switch is UL listed and meets NEMA standards.
Amperage Rating | 20 |
Application | For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present |
Brand | Appleton |
Catalog Description | Contender EDSC Series 2-Gang 3-Way Tumbler Switch, Voltage Rating: 120 - 277 VAC, Amperage Rating: 20 AMP, Actuator: Front Operated, Enclosure: NEMA 3, 7CD, 9EFG, Mounting: Surface Mount With 1 IN Feed-Thru Hub, HP Rating: 1 HP At 120 VAC, 2 HP At 240 VAC, Material: Malleable Iron Body, Nylon 6/6 Handle, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Height: 5.31 IN, Width: 7.41 IN, Depth: 5.31 IN, Standard: UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Division 1, Groups C, D, Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2, Groups E, F, G, Class III, For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present |
Enclosure | NEMA 3, 7CD, 9EFG |
GTIN |
00781381699372 |
Height | 6.0000 |
Height Unit | IN |
Item Status | A |
Length | 7.8000 |
Length UOM | IN |
Mfr. # | EDSC3230 |
Mounting | Surface Mount With 1 IN Feed-Thru Hub |
Special Features | Corrosion resistant, pad lockable in the on or off position; Enclosures have external mounting lugs for ease of mounting; Smooth, rounded integral bushing in each hub protects conductor insulation; Enclosures furnished with internal ground screw; Smooth ground mating surfaces assure flame-tight joint between cover and mounting enclosure; Stainless steel hex head cap screws for attaching cover to mounting enclosure; Each handle has close-tolerance threaded stainless steel shaft to meet explosionproof requirements; Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect operation of lighting and light power loads; On/off legend marking |
Standard | UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Division 1, Groups C, D, Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2, Groups E, F, G, Class III |
Sub-Brand | Contender |
Type | EDSC Series 2-Gang 3-Way Tumbler Switch |
UNSPSC | 39121565 |
Voltage Rating | 120 to 277 |
Width | 7.3000 |
Width UOM | IN |