Size: 3 Inch Width x 4.690 Inch Depth x 4.630 Inch Height
Detailed Description:
Appleton 1-Gnag Tumbler switch features enclosures that have external mounting lugs and furnished with internal ground screw. Enclosure of the switch has malleable iron cover/body and aluminum chamber for durability. It has smooth, rounded integral bushing in each hub protects conductor insulation. It measures 3 Inch x 4.690 Inch x 4.630 Inch. Switch is rated at 20 Amps/30 Amps units for use with 120-277 VAC and features surface mount with 3/4 Inch feed-thru hub. It is designed for use in classified areas where ignitable vapors, gases or highly combustible dusts are present. Switch features soft ground mating surfaces assure flame-tight joint between cover and mounting enclosure.
The 2-Pole Switch comes with stainless steel hex head cap screws for attaching cover to mounting enclosure. It features 3/4 Inch sized hub with nylon handle that has close-tolerance threaded stainless steel shaft to meet explosion proof requirements. It is designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect operation of lighting and light power loads. It has on/off legend marking and front operated actuator. It is designed to install in class I, class II and class III hazardous area. Switch is UL listed and CSA certified.
Amperage Rating | 30 |
Application | For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present |
Brand | Appleton |
Catalog Description | UNILETS EDSC Series 1-Gang Tumbler Switch, Voltage Rating: 120 - 277 VAC, Amperage Rating: 30 AMP, Number Of Poles: 2, Actuator: Front Operated, Enclosure: NEMA 7CD, 9EFG, Mounting: Surface Mount With 3/4 IN Feed-Thru Hub, HP Rating: 2 HP At 120/240 VAC, Material: Malleable Iron Body, Nylon 6/6 Handle, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Height: 4.63 IN, Width: 3 IN, Depth: 4.69 IN, Standard: UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Group B, As Well As Class I, Groups C And D, Class II, Groups E, F, G, And Class III, For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present |
Enclosure | NEMA 7CD, 9EFG |
GTIN |
00781381451062 |
Height | 5.0000 |
Height Unit | IN |
Item Status | A |
Length | 7.0000 |
Length UOM | IN |
Mfr. # | EDSC175-F23 |
Mounting | Surface Mount With 3/4 IN Feed-Thru Hub |
Special Features | Corrosion resistant, pad lockable in the on or off position; Enclosures have external mounting lugs for ease of mounting; Smooth, rounded integral bushing in each hub protects conductor insulation; Enclosures furnished with internal ground screw; Smooth ground mating surfaces assure flame-tight joint between cover and mounting enclosure; Stainless steel hex head cap screws for attaching cover to mounting enclosure; Each handle has close-tolerance threaded stainless steel shaft to meet explosionproof requirements; Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect operation of lighting and light power loads; On/off legend marking |
Standard | UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Group B, As Well As Class I, Groups C And D, Class II, Groups E, F, G, And Class III |
Sub-Brand | UNILETS |
Type | EDSC Series 1-Gang Tumbler Switch |
UNSPSC | 39121565 |
Voltage Rating | 120 to 277 |
Width | 6.0000 |
Width UOM | IN |