Size: 3 Inch Width x 4.690 Inch Depth x 5.380 Inch Height
Detailed Description:
Appleton EDS Series 1-Gang 2-Pole Factory sealed front operated tumbler switch has current rating of 20 Amps and voltage rating of 120/277 VAC. Dead-end switch has malleable iron body and cover to offer enhanced durability. Switch handle is made of nylon for durability. Switch has pre-drilled holes in bottom of bracket to offer direct mounting to control stations with existing cover bolts. Bracket is ideally designed to avoid costly field installation of tapping and drilling to fit circuit identification nameplate. It has zinc electro-plated/chromate/epoxy powder coated finish for corrosion resistance. It measures 3 Inch x 4.690 Inch x 5.380 Inch. The 1-Gang factory sealed front operated tumbler switch has 3/4-Inch hub.
Tumbler switch comes with internal ground screws to offer convenient installation. Factory sealed front operated tumbler switch is explosionproof and dust-Ignition proof. It is ideally designed for use with threaded metal conduits. Switch is suitable for chemical plants petrochemical plants, refineries and other process industries. Tumbler switch eliminates arcing of enclosed switches in ignitable atmospheres during connect/disconnect operation of lighting and light power loads.
Switch has enclosures with external mounting lugs to offer convenient mounting. Switch has smooth/rounded built-in bushing in each hub to offer superior protection to insulated conductor. It has sealing chamber with prewired factory sealed pigtail leads for connectivity. Switch has corrosion resistant, stainless steel hex head cap screws to offer convenient attachment to cover/body/sealing chamber assembly. It has horsepower rating of 1 hp at 120 VAC and 2 hp at 240 VAC. It is suitable for area, where ignitable vapors, gases or highly combustible dust is present.
Amperage Rating | 20 |
Application | For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present |
Brand | Appleton |
Catalog Description | UNILETS EDS Series 1-Gang Tumbler Switch, Voltage Rating: 120 - 277 VAC, Amperage Rating: 20 AMP, Number Of Poles: 2, Actuator: Front Operated, Enclosure: NEMA 7CD, 9EFG, Mounting: Surface Mount With 3/4 IN Dead-End Hub, HP Rating: 1 HP |
Enclosure | NEMA 7CD, 9EFG |
GTIN |
00781381325448 |
Height | 4.8000 |
Height Unit | IN |
Item Status | A |
Length | 7.5000 |
Length UOM | IN |
Mfr. # | EDS175-F2 |
Mounting | Surface Mount With 3/4 IN Dead-End Hub |
Special Features | Corrosion resistant, pad lockable in the on or off position; Enclosures have external mounting lugs for ease of mounting; Smooth, rounded integral bushing in each hub protects conductor insulation; Enclosures furnished with internal ground screw; Smooth ground mating surfaces assure flame-tight joint between cover and mounting enclosure; Stainless steel hex head cap screws for attaching cover to mounting enclosure; Each handle has close-tolerance threaded stainless steel shaft to meet explosionproof requirements; Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect operation of lighting and light power loads; On/off legend marking |
Standard | UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Group B, As Well As Class I, Groups C And D, Class II, Groups E, F, G, And Class III |
Sub-Brand | UNILETS |
Type | EDS Series 1-Gang Tumbler Switch |
UNSPSC | 39121565 |
Voltage Rating | 120 to 277 |
Width | 5.5000 |
Width UOM | IN |