Detailed Description: Appleton Lighting fixture accommodates four 120/277-Volt 40-Watt F40BX fluorescent lamps. It features copper-free aluminum construction with epoxy powder coat finish. Fixture is suitable for refineries, chemical/petrochemical plants, textile mills, grain elevators and other grain-processing facilities, pharmaceutical plants as well as paint spray areas. It measures 52.5 Inch x 16 Inch x 7.75 Inch. It has a hub size of 3/4 Inch. It withstands a temperature rating of 60 degree Celsius. Fixture is UL listed and CSA certified.
Application | For Use In Marine And Wet Locations, Classified Areas Where Ignitable Gases And Vapors, Dusts, Paint Residue, Paint Powder, Or Corrosive Atmospheres May Be Present, Or Where Excessive Moisture Is A Problem, Refineries, Chemical And Petrochemical Plants, Textile Mills, Grain Elevators And Other Grain Processing Facilities, Pharmaceutical Plants, And Paint Spray Areas |
Brand | Appleton |
Catalog Description | APL Fluorescent Factory Sealed Luminaire Without Reflector, Lamp Type: (4) 40 WTT 20000 HR F40BX Fluorescent (Included), Lamp Wattage: 40 WTT, Voltage Rating: 120 - 277 V, Number Of Lamps: 4, Fixture Wattage: 160 WTT, Length: 52.5 IN, He |
GTIN |
00781381086769 |
Height | 7.75 |
Height Unit | IN |
Item Status | O |
Lamp Type | (4) 40 WTT 20000 HR F40BX Fluorescent (Included) |
Length | 52.5 |
Length UOM | IN |
Mfr. # | APL440BU |
Number Of Lamps | 4 |
Special Features | Factory sealed - external seals not required; Easy to install; Three 3/4 IN conduit hubs on each end of fixture, two close-up plugs furnished per end; Mounts straight down or at 45 DEG angle to either side; can be mounted horizontally or vertically on wall; Gasketed end caps remove easily for wiring or relamping; Explosionproof, heat-resistant and impact-resistant glass tubes protect lamps; Cool-operating fluorescent lamps (furnished) provide excellent color rendition and high lumen output per watt; Corrosion resistant; Supplied with energy-saving Class P ballasts, equipped with an automatic thermally activated protective device; Uses four single-ended biaxial 40 WTT fluorescent lamps mounted tandem |
Standard | Class I, Division 1 And 2, Groups C, D; Class II, Division 1 And 2, Groups E, F, G; Class III; UL Listed: E10794, 1598, 844; CSA Certified: 025428, C22.2 No. 250, C22.2 No. 137; Complies With NEC 516-3(b) And NFPA No. 33 |
Type | APL Fluorescent Factory Sealed Luminaire Without Reflector |
UNSPSC | 39111501 |
Voltage Rating | 120 to 277 |
Width | 23.5000 |
Width UOM | IN |