Dimension: 9 Inch Length x 6 Inch Width x 5.500 Inch Height
Meets airtight requirements for 2 CFM or less air leakage
0.035 Inch white baked enamel one-piece drawn steel housing, adjustable for ceiling thickness up to 1-1/4 Inch
Minimum clearance of 3 Inch from thermal insulation and 1/2 Inch from adjacent building components
Have factory installed gaskets to restrict airflow from room into ceiling plenum to less than 2 CFM
Detailed Description:
Nora 4-Inch Low voltage air-tight housing is designed for use with 12-Volts MR16 lamp and offers crisp, defined MR16 quartz halogen illumination to any applications. It has a 50-Watts 120/12 Volts magnetic transformer. It is adjustable and provides fine-tuned aiming of directional light sources. Housing requires a 3-Inch clearance from thermal insulation and 1/2-Inch from adjacent building components. It is engineered with a tempered UV/shatter shield. It has a power rating of 20 - 75 Watts. Housing has a circular bracket on low voltage trims to ensure a secure snap-in hold and friction-locked aiming adjustment.
Housing comes with a pre-installed gasket to limit airflow from room into ceiling plenum. It has 13-5/8 - 24-1/2-Inch adjustable slotted bar hangers that can be repositioned up to 90 deg for T-bar installation. Housing includes captive nails and quick connector along with a junction box containing seven 1/2" knockouts and four Romex® pryouts with strain relief for branch circuit wiring. Housing is cULus damp location listed with feed through, Washington State approved and meets ASTM-283 standards.
Dimensions | 9 Inch Length x 6 Inch Width x 5.500 Inch Height x 4 Inch ID x 4.375 Inch Cut-Out |
Amperage | 15 A |
Application | For New Construction |
Brand | Nora |
Catalog Description | Nora Lighting; Low Voltage New Construction Housing; Wattage: 20 - 75 WTT; Voltage Rating: 12 VAC; Frequency Rating: 60 HZ; Lamp Type: MR16; Socket Type: Low Voltage Bi-Pin Socket With Heat Shield; Inside Diameter: 4 IN; Housing Height: 5-1/2 IN (50 WTT), 6-3/8 IN (75 WTT); Housing Width: 6 IN (50 WTT), 7 IN (75 WTT); Housing Length: 9 IN (50 WTT), 11-1/2 IN (75 WTT); Ceiling Cut-out: 4-3/8 IN; Ceilling Thickness: 5/8 - 1-3/8 IN; Housing: 035 White Baked Enamel One-Piece Drawn Steel, Adjustable For Ceiling Thickness Up To 1-1/4 IN |
Ceiling Type | Non-Insulated |
Commodity Code | 51100 |
Construction | Steel |
Country Of Origin | USA |
Finish 2 | Gray |
Finish Color | Gray |
Frequency Rating | 60 |
GTIN |
00732180403240 |
Item | 4 Inch Housing |
Lamp Type | 20 - 75 Watt MR16 |
Material | Nylon |
Mfr. # | NL-401QAT |
Mounting | Ceiling |
Number Of Lamps | 1 |
Operation Type | Three Way |
Socket Type | Low Voltage Bi-Pin Socket With Heat Shield |
Special Features | Features: Nora LightingS Series Of 4IN Low Voltage Housings Provides Crisp, Defined MR16 Quartz Halogen Illumination To Any Application; A Wide Variety Of Attractive Adjustable Trims Allows Fine-Tuned Aiming Of Directional Light Sources; Transformer:- Input: Available in 120 V Or 277 V; Type: Available in Electronic or Magnetic; Output: Available in 12 V 50 WTT Or 12 V 75 WTT; Air Tight (At): Available With Air-Tight Housings That Include A Pre-Installed Gasket To Restrict Airflow From Room Into Ceiling Plenum; Minimum Clearances: Non-Ic Housings Require A Minimum Clearance Of 3 IN From Thermal Insulation And 1/2 IN From Adjacent Building Components; Ceiling Thickness: Ceiling Thickness Varies From 5/8 IN To 1-3/8 IN; Lamp Adjustment: Circular Bracket On Low Voltage Trims Provides A Secure Snap-In Hold And Friction-Locked Aiming Adjustment; UV/Shatter Guard Shield: All Low Voltage Trims Include A Tempered UV/Shatter Shield; Bar Hangers: Bar hangers are adjustable from 13-5/8 IN To 24-1/2 IN and can be repositioned 90 DEG; Bar hangers are slotted for T-bar installation and include captive nails; Junction Box: Junction Box Is Listed For Through Branch Circuit Wiring And Contains Seven 1/2 IN Knockouts And Four Romex Pryouts With Strain Relief; Dimming: Use Magnetic Low Voltage Dimming Control With Magnetic Transformer Or Electronic Low Voltage Dimming Control With Electronic Transformer; Electrical: Quick Connector Provided; Wattage: 20 WTT -75 WTT (Actual Wattage Varies With Trim); Lamp: 12 V MR16; Dimensions:- Length: 9 IN (120 V) 11-1/2 IN (277 V); Width: 6 IN (120 V) 7 IN (277 V); Depth: 5-1/2 IN (120V) 6-3/8 IN (277V); Ceiling Opening: 4-3/8 IN; Listing: cULus Damp Location With Feed Through; cULus Wet Location (Only With Designated Trims); Washington State Approved (At Only); Meets Or Exceeds ASTM-283 Air-Tight (At Only); Inside Diameter: 4 IN; Housing Height: 5-1/2 IN (50 WTT), 6-3/8 IN (75 WTT); Housing Width: 6 IN (50 WTT), 7 IN (75 WTT); Housing Length: 9 IN (50 WTT), 11-1/2 IN (75 WTT); Ceiling Cut-out: 4-3/8 IN; Ceilling Thickness: 5/8 - 1-3/8 IN; Housing: 035 White Baked Enamel One-Piece Drawn Steel, Adjustable For Ceiling Thickness Up To 1-1/4 IN |
Standard | C/US UL Listed For Wet/Damp Location, Meets Or Exceeds ASTM-283 Air-Tight |
Standards | cULus Listed For Damp Location With Feed Through, Meets Or Exceeds ASTM-283 Air-Tight Requirements |
Transformer Type | 120 Volt/12 Volt 50 Watt Magnetic |
Type | Low Voltage, Airtight |
Voltage Rating | 12 Volt |
Wattage | 20 - 75 |
Wiring | Side |