The elbow and the bushing insert comprise the essential components of all loadbreak connections
An aluminum crimp barrel is inertia-welded to a copper lug
3M 5811 Series Industrial loadbreak elbow is a fully shielded and insulated plug-in termination. It is molded using high quality peroxide-cured EPDM insulation. Elbow connects cable to the loadbreak probe. It features aluminum barrel to crimp easily and copper lug that provides a reliable, tight, cool operating connection with the loadbreak probe. Elbow has a current rating of 200 Amps and a voltage rating of 25 kilo-Volts. It is ideal for connecting 25 kilo-Volts underground cable to transformers, switchgear and junctions equipped with loadbreak bushings. Elbow can accommodate 4/0 AWG stranded at 25 kilo-Volts, 250 kcmil compact/solid wires at 25 kilo-Volts, 4/0 AWG stranded at 25 kilo-Volts conductors.
Elbow can be used on tape shield, wire shield, unishield and jacketed concentric neutral types of cables. Elbow has a cable insulation diameter range of 1.040 - 1.250 Inch. It comes with elbow body, coppertop compression connector, tin plated copper loadbreak probe with an ablative arc-follower tip, probe installation tool, silicone lubricant, cold shrink jacketing tube, three mastic strips, ground braid assembly, constant force spring, CC-3 cable cleaning pads, stainless steel reinforced pulling-eye and a capacitive test point. Elbow meets ANSI/IEEE 386 standards.
|Catalog Description||3MÖ 5811 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated plug in termination. This kit is ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield« and JCN types of cables. The elbow is peroxide cured EPDM.|
|Ships Ground. Eligible for expedited shipping||Yes|